| Type | WSG122-SC/SV |
| Gauge | 3.5.7MG, 5G,7G,10G,12G,14G |
| Knitting width | Variable stroke, Max 48/56'' (122/142cm) |
| Knitting speed | Knitting speed varies according to gauge and knitting condition. Variably adjustable speed levels, 10 additional programmable speeds, Max 1.4m/sec. |
| Stitch density | 60 section stitch selectable, adjustable scope supported by subdevision technology:0-350. |
| Racking | Motor-driven racking mechanism. Max 2-inch racking. 1/2 and 1/4 pitch also available from any position. |
| Knitting system | Double knitting system, due to the three-way-technique it could knit, tuck, miss knit in one cam system. |
| Knitting function | Simultaneous transfer, front or back, independent of carriage direction. |
| Sinker system | Compound-type moveable full-sinker system. |
| Needle selection | Full jacquard selection via special eight level solenoid actuators. |
| Setup device | Take down comb with compound needles, it can easily catch or take off the fabric. |
| Takedown device | Main/sub rollers. Changeable 31 levels, automatically adjustable on each level. Automatic opening and closing. |
| Yarn cutter | Single-unit system includes 1 yarn cutter and 2 yarn grippers. Left and right side standard. |
| Yarn feeder roller | Left side standard, for especially suitable to knit yarns with low strength. |
| Side tensions | Side tension, 12 on each side. |
| Yarn carriers | 16 normal carriers. |
| Top tensions | 16 top tensions, one-touch easy threading. Large knots cause machine stop. |
| Stop motion | Yarn break, large knot, warp ground check, shock detection, piece count, over-torque, program error, etc. |
| Drive system | Belt drive. AC servo motor. No lubrication necessary. |
| Safety devices | Full safty cover for noise-suppression and dust-proofing with stop motion sensor and interlock mechanism. Stop button. Power supply disconnecting device. Ultra-low speed "crawl" setting. CE Mark. Indicator lamps(see below). |
| Operation lamp | Green/normal operation. Flashing green/normal stop. Flashing amber/abnormal stop. |
| Data input | USB memory interface. Ethernet 10/100 BASE-T network interface. |
| Machine pattern memory | 25,165,824 bits (1,024 wales x 8,129 addresses) |
| Control unit | Built-in controller. Stored program for flat knitting machine. |
| Control display | Monochrome LCD panel. Editing possible via display panel operation. Available Chinese and English. |
| Back-up power | Power supply for resuming knitting after power failure. |
Power
| Single phase AC220V+/-10%., |
| About 1.5KW, max 2.5 KW. |
| Packing dimension and weight | L*W*H 2370X 832X2050mm 1060KG |
Company Profile
