Negotiable
The date of payment from buyers deliver within days
Jiangsu
Long-term effective
2018-04-16 21:52
398
Company Profile
Yixing Xincheng Industrial Automation Technology Co.,LtdBy certification [File Integrity]
Contact:xcgyzdh(Mr.)
Email:
Telephone:
Phone:
Area:Jiangsu
Address:Jiangsu
Website:http://www.xinchengcanmaking.com/ http://xcgyzdh.tsqpmp.com/
Single-head Automatic Seal Ring Making Machine
Application:
The equipment is applied to make the seal rings of 18L / 20L chemical cans, and paint buckets.
This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.
We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance.
Parameters:
Single-head Automatic Seal Ring Making Machine | |||
Weight |
0.4T |
Voltage |
Three-phrase 380V |
Size mm length*width*height |
1050*1050*1400 |
Pressure |
4-6MPa |
Production Capacity |
16 sets/ min |
Total Power |
1.5kw |
System Parameters | |||
Cushion Angle |
50 degrees |
Cushion Revolution |
0.3 revolution/s |
Pulses/circle |
1000 |
Reduction Ratio |
9 |
Advantages:
The equipment can reduce workers’ workloads, and help workers improve work efficiency.
The equipment is easily operated, and can control the length of the rubber strip accurately.
Services:
Ø Provide the technical design and solutions;
Ø Designing and manufacturing of non-standard equipment;
Ø Professional technical training and guidance on site according to the contract;
Ø Tele-technical consulting and services;
Ø Other special technical service according to client’s requirements.
Faults & Methods for Single-head automatic seal ring making machine:
Fault 1: The unreeling machine keeps spinning for a long time.
Cause: It induces unreeling signal unsuccessfully.
Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.
Fault 2: The feeding cylinder doesn’t go forward.
Cause: Its start- point or all parts of it induce the signal unsuccessfully.
Methods: Please check the small cylinder’s induction which can screw down & lift up in the pushing part;
Please check the induction of pushing cylinder;
Please check if the photo-electricity switches of all work-pieces are on;
Please check if the gas path is unobstructed.
http://www.xinchengcanmaking.com/